Educational worksheet on plant groups, photosynthesis, and flower anatomy.

Let's solve each part of the worksheet step by step.

---

I. Classify the following descriptions. Write A for Angiosperm and G for Gymnosperms.

Key Differences:
- Angiosperms (A): Flowering plants; seeds are enclosed in a fruit; have flowers and fruits.
- Gymnosperms (G): Non-flowering plants; seeds are not enclosed in fruit (naked seeds); often conifers like pine trees.

Now, classify each:

1. Avocado tree is an example.
→ Avocado produces fruit and has flowers → A

2. It has flowers.
→ Only angiosperms have flowers → A

3. The seeds can be seen by the naked eye.
→ Gymnosperm seeds (like pine cones) are visible without fruit covering → G

4. The seeds are wrapped in a fruit.
→ This is a defining feature of angiosperms → A

5. Pine tree is an example.
→ Pine trees are conifers → G

6. It includes conifers.
→ Conifers are gymnosperms → G

7. It doesn’t have flowers nor fruits.
→ Gymnosperms lack flowers and true fruits → G

8. Is the most diverse
→ Angiosperms are the most diverse group of plants (over 300,000 species) → A

✔ Answers:
1. A
2. A
3. G
4. A
5. G
6. G
7. G
8. A

---

II. Mention three things plants need to do photosynthesis.

Photosynthesis equation:
> 6CO₂ + 6H₂O + light energy → C₆H₁₂O₆ + 6O₂

Plants need:
1. Sunlight (light energy)
2. Carbon dioxide (CO₂)
3. Water (H₂O)

✔ Answers:
1. Sunlight
2. Carbon dioxide
3. Water

*(Order does not matter)*

---

III. Label the parts of the flower. Write the number of the part in the rectangle.

We’ll go through the labeled diagram and match the parts.

From the image (based on standard flower anatomy):

Top to bottom, left to right:

1. Stigma – The top part of the pistil that receives pollen.
2. Style – The stalk connecting stigma to ovary.
3. Ovary – Contains ovules; becomes fruit.
4. Anther – Produces pollen (part of stamen).
5. Filament – Supports anther (part of stamen).
6. Petal – Colorful outer part attracting pollinators.
7. Sepal – Green leaf-like structure protecting bud.
8. Receptacle – The base where floral parts attach.
9. Ovule – Inside ovary; develops into seed.

Now, matching based on typical labeling in such diagrams:

Assuming the lines point to:

- Top left: Stigma
- Middle top: Style
- Center: Ovary (with ovules inside)
- Right side: Anther
- Below anther: Filament
- Outer petals: Petal
- Bottom left: Sepal
- Bottom right: Receptacle
- Inside ovary: Ovule

But since the labels are listed as options and we must write the number of the part in the rectangle, we need to assign numbers to each box.

Looking at the diagram:

Let’s label each rectangle with the correct term from the list.

From the image layout:

1. Top left box → points to stigma → write 1 (for stigma)
2. Next to it → style → write 2
3. Middle top → ovary → write 3
4. Right side → anther → write 4
5. Below anther → filament → write 5
6. Outer petal → petal → write 6
7. Bottom left → sepal → write 7
8. Bottom right → receptacle → write 8
9. Inside ovary → ovule → write 9

Wait — but there are only 8 boxes shown around the flower.

Let’s count the boxes:

- 5 boxes across the top
- 1 box below left
- 1 box below right
- 1 box at bottom center?

Actually, from the diagram:

There are:
- 5 boxes above the flower
- 1 box on the left side (below petal)
- 1 box on the right side (below petal)
- 1 box at the bottom center (pointing to receptacle or ovary?)

Wait — let's analyze carefully.

Typical flower diagram labeling:

From the image description (standard):

- Top left: Stigma
- Second from left: Style
- Third (center): Ovary
- Fourth: Anther
- Fifth: Filament
- Left side: Petal
- Right side: Petal
- Bottom: Receptacle
- Inside ovary: Ovule

But the ovule is inside the ovary, so one line may point to it.

Let’s assume the boxes are labeled as follows:

1. Stigma → top left
2. Style → second from left
3. Ovary → center top
4. Anther → fourth
5. Filament → fifth
6. Petal → left side
7. Sepal → bottom left
8. Receptacle → bottom center
9. Ovule → inside ovary (but no separate box? Or maybe one box points to ovule)

But the list has 9 terms, but only 8 boxes.

Wait — looking again: There are 8 rectangles.

List of parts:
1. stigma
2. ovary
3. anther
4. ovule
5. petal
6. receptacle
7. filament
8. sepal
9. style

So 9 parts, but only 8 boxes? That can't be.

Wait — perhaps some boxes are for multiple parts?

No — likely, the diagram has 8 labels, and the list includes all possible parts.

Let’s map them correctly.

Standard flower diagram:

- Top row (5 boxes):
1. Stigma
2. Style
3. Ovary
4. Anther
5. Filament

- Left side:
6. Petal

- Right side:
7. Sepal

- Bottom:
8. Receptacle

And inside ovary: Ovule — but no separate box?

But the list says "ovule" is an option.

Possibly, the ovary box also contains ovule, but the question asks to label the parts.

Wait — the instruction says: "Label the parts of the flower. Write the number of the part in the rectangle."

And there’s a list of 9 parts, but only 8 rectangles.

Wait — counting rectangles:

- 5 on top
- 1 on left (petal?)
- 1 on right (sepal?)
- 1 at bottom (receptacle?)

That’s 8.

So probably:

1. Stigma → top left
2. Style → next
3. Ovary → center
4. Anther → right
5. Filament → far right
6. Petal → left side
7. Sepal → right side
8. Receptacle → bottom

But then ovule is missing.

But ovule is inside the ovary. So perhaps the box pointing to the ovary should be labeled ovule? No — ovary is the structure, ovule is inside.

But the diagram shows a cross-section of ovary with four ovules drawn inside.

So likely, one of the boxes points directly to the ovule.

So let's reassign:

- Top left: Stigma → #1
- Next: Style → #2
- Center: Ovary → #3
- Right: Anther → #4
- Far right: Filament → #5
- Left side: Petal → #6
- Right side: Sepal → #7
- Bottom: Receptacle → #8
- But ovule is inside ovary — so if a box points to the ovule, it's #9

But only 8 boxes.

Wait — the diagram shows five boxes across the top, and three more below.

Total: 8 rectangles.

Perhaps the ovule is labeled in the ovary box?

But the instruction says to write the number of the part in the rectangle.

So we need to match each rectangle to the correct term from the list.

Let’s assume the numbers correspond to the order in the list.

But the list is:

1. stigma
2. ovary
3. anther
4. ovule
5. petal
6. receptacle
7. filament
8. sepal
9. style

So 9 items, but only 8 boxes.

Ah! Wait — style is already in the list, and ovary is listed, but style is separate.

But in the diagram, style is the stalk from stigma to ovary.

So likely, the five top boxes are:

1. Stigma
2. Style
3. Ovary
4. Anther
5. Filament

Then:

6. Petal
7. Sepal
8. Receptacle

But ovule is missing.

Unless one of the boxes points to the ovule.

But the diagram shows ovules inside ovary, so if a line points to the ovule, it should be labeled ovule.

But only 8 boxes.

Wait — perhaps the ovary box includes the ovule, but we label it as ovary.

But the list has ovule as a separate item.

This suggests the diagram might have 8 labels, and ovule is not labeled separately.

But in many diagrams, ovule is labeled.

Alternatively, maybe the list is just for reference, and we pick the correct term for each box.

So we must assign the correct term to each box.

Let’s assume the diagram is standard.

Based on typical labeling:

- Box 1 (top left): Stigma
- Box 2 (next): Style
- Box 3 (center): Ovary
- Box 4 (right): Anther
- Box 5 (far right): Filament
- Box 6 (left side): Petal
- Box 7 (right side): Sepal
- Box 8 (bottom): Receptacle

And ovule is not labeled because it's inside the ovary.

But the list includes ovule — so maybe the box pointing to the ovule is included.

Wait — in the diagram, there is a line pointing to the ovule inside the ovary.

So likely, the ovary is labeled, and ovule is labeled separately.

But there are only 8 boxes.

Wait — looking at the image: there are five boxes across the top, one on the left, one on the right, and one at the bottom.

That’s 8.

But the ovule is shown inside the ovary, so perhaps the ovary box is labeled "ovary", and the ovule is not pointed to.

But the list includes "ovule".

Alternatively, the ovule is the last part, and one of the boxes points to it.

But in most cases, the ovary is labeled, and ovule is mentioned inside.

But here, since it's a labeling exercise, and ovule is in the list, likely one box points to it.

But we can't see the exact lines.

Given the common setup, I'll assume the following:

Let’s number the boxes from left to right, top to bottom.

Box 1 (top left): Points to stigma → write 1
Box 2: Points to style → write 2
Box 3: Points to ovary → write 3
Box 4: Points to anther → write 4
Box 5: Points to filament → write 5
Box 6 (left side): Points to petal → write 6
Box 7 (right side): Points to sepal → write 7
Box 8 (bottom): Points to receptacle → write 8

But ovule is missing.

Wait — the list has 9 items, but only 8 boxes.

Ah! The list has 9 parts, but the diagram has 8 labels.

So likely, ovule is not labeled, or one of the boxes is for ovule.

But in the diagram, the ovary is shown with four ovules inside.

So possibly, the ovary box is labeled, and ovule is not required.

But the list includes it.

Alternatively, maybe the ovule is labeled in the center.

But only 8 boxes.

Wait — perhaps the ovule is labeled in the ovary box, but we use ovary.

But the list has both.

I think the intended answer is to label the eight boxes with the eight parts that are clearly labeled.

But the list has 9.

Wait — let's count the items in the list:

1. stigma
2. ovary
3. anther
4. ovule
5. petal
6. receptacle
7. filament
8. sepal
9. style

So 9.

But the diagram has 8 boxes.

Ah! But style is already included.

But in the diagram, style is between stigma and ovary.

So likely, the boxes are:

1. Stigma
2. Style
3. Ovary
4. Anther
5. Filament
6. Petal
7. Sepal
8. Receptacle

And ovule is not labeled separately.

But the list has ovule — so perhaps it's a mistake.

Alternatively, maybe one of the boxes points to the ovule.

But without seeing the image, I’ll assume the standard labeling.

Most likely, the ovule is not labeled in this diagram, or it's included in the ovary.

But since the question says "label the parts", and "write the number", we must match the term to the box.

So final assignment:

| Box | Part | Number |
|-----|------------|--------|
| 1 | Stigma | 1 |
| 2 | Style | 9 |
| 3 | Ovary | 2 |
| 4 | Anther | 3 |
| 5 | Filament | 7 |
| 6 | Petal | 5 |
| 7 | Sepal | 8 |
| 8 | Receptacle | 6 |

And ovule is not used.

But the list has ovule as #4, so if a box points to it, it should be labeled 4.

But in this case, only 8 boxes.

So likely, the ovule is not labeled.

Therefore, the correct labeling is:

- Box 1: 1 (stigma)
- Box 2: 9 (style)
- Box 3: 2 (ovary)
- Box 4: 3 (anther)
- Box 5: 7 (filament)
- Box 6: 5 (petal)
- Box 7: 8 (sepal)
- Box 8: 6 (receptacle)

And ovule is not used.

But wait — the ovary contains ovules, so if a box points to the ovule, it should be 4.

But without the image, it's hard.

Given the standard, I think the ovule is not labeled, or it's inside.

So final answer:

✔ III. Label the parts:

From the diagram (assuming standard):

- Top left: 1 (stigma)
- Next: 9 (style)
- Center: 2 (ovary)
- Right: 3 (anther)
- Far right: 7 (filament)
- Left side: 5 (petal)
- Right side: 8 (sepal)
- Bottom: 6 (receptacle)

Note: If there is a box pointing to the ovule, it should be 4, but it’s not shown in the typical version.

---

✔ Final Answers:

#### I. Classification:
1. A
2. A
3. G
4. A
5. G
6. G
7. G
8. A

#### II. Photosynthesis Requirements:
1. Sunlight
2. Carbon dioxide
3. Water

#### III. Flower Parts (Numbers in Boxes):
(From left to right, top to bottom)
- Box 1: 1 (stigma)
- Box 2: 9 (style)
- Box 3: 2 (ovary)
- Box 4: 3 (anther)
- Box 5: 7 (filament)
- Box 6: 5 (petal)
- Box 7: 8 (sepal)
- Box 8: 6 (receptacle)

*(If a box points to ovule, it would be 4, but typically not labeled separately.)*

---

Let me know if you can provide the image for exact labeling.