Technical drawing showing an isometric view and orthographic projections of a mechanical component.

Problem Description:

The task involves analyzing a 3D object and drawing its top view, front view, and right-side view. The 3D object is provided in the image, and we need to create the corresponding orthographic projections.

Solution Approach:

To solve this problem, we will:
1. Understand the 3D Object: Analyze the given 3D object and identify its features, such as protrusions, holes, and overall shape.
2. Draw the Top View: Project the object onto the horizontal plane (top view).
3. Draw the Front View: Project the object onto the vertical plane facing the viewer (front view).
4. Draw the Right-Side View: Project the object onto the vertical plane on the right side of the object (right-side view).

Step-by-Step Solution:

#### 1. Understanding the 3D Object:
- The object is a rectangular block with a cylindrical hole on the right side.
- There is a smaller rectangular protrusion on top of the main block.
- The protrusion is offset from the center and has a square cutout on its top face.

#### 2. Drawing the Top View:
- The top view shows the shape of the object as seen from directly above.
- The main block appears as a rectangle.
- The smaller rectangular protrusion is visible as a smaller rectangle on top of the main block.
- The square cutout on the top of the protrusion is also visible as a smaller square inside the protrusion.
- The cylindrical hole on the right side does not affect the top view since it is a through-hole and does not appear in this projection.

Top View:
```
+-------------------+
| |
| +-------+ |
| | | |
| | +---+ |
| | | | |
| +-------+ |
| |
+-------------------+
```

#### 3. Drawing the Front View:
- The front view shows the shape of the object as seen from the front.
- The main block appears as a rectangle.
- The smaller rectangular protrusion is visible as a smaller rectangle extending from the top of the main block.
- The square cutout on the top of the protrusion is not visible in the front view.
- The cylindrical hole on the right side appears as a circular cutout in the front face of the main block.

Front View:
```
+-------------------+
| |
| +-------+ |
| | | |
| | | |
| +-------+ |
| |
+-------------------+
| |
| O |
| |
+-------------------+
```

#### 4. Drawing the Right-Side View:
- The right-side view shows the shape of the object as seen from the right side.
- The main block appears as a rectangle.
- The smaller rectangular protrusion is visible as a smaller rectangle extending from the top of the main block.
- The square cutout on the top of the protrusion is not visible in the right-side view.
- The cylindrical hole on the right side appears as a circular cutout in the side face of the main block.

Right-Side View:
```
+-------------------+
| |
| +-------+ |
| | | |
| | | |
| +-------+ |
| |
+-------------------+
| |
| O |
| |
+-------------------+
```

Final Answer:

The completed views are as follows:

- Top View:
```
+-------------------+
| |
| +-------+ |
| | | |
| | +---+ |
| | | | |
| +-------+ |
| |
+-------------------+
```

- Front View:
```
+-------------------+
| |
| +-------+ |
| | | |
| | | |
| +-------+ |
| |
+-------------------+
| |
| O |
| |
+-------------------+
```

- Right-Side View:
```
+-------------------+
| |
| +-------+ |
| | | |
| | | |
| +-------+ |
| |
+-------------------+
| |
| O |
| |
+-------------------+
```

\boxed{
\begin{aligned}
&\text{Top View:} \\
&\begin{array}{c}
+-------------------+ \\
| | \\
| +-------+ | \\
| | | | \\
| | +---+ | \\
| | | | | \\
| +-------+ | \\
| | \\
+-------------------+
\end{array} \\
&\text{Front View:} \\
&\begin{array}{c}
+-------------------+ \\
| | \\
| +-------+ | \\
| | | | \\
| | | | \\
| +-------+ | \\
| | \\
+-------------------+ \\
| | \\
| O | \\
| | \\
+-------------------+
\end{array} \\
&\text{Right-Side View:} \\
&\begin{array}{c}
+-------------------+ \\
| | \\
| +-------+ | \\
| | | | \\
| | | | \\
| +-------+ | \\
| | \\
+-------------------+ \\
| | \\
| O | \\
| | \\
+-------------------+
\end{array}
\end{aligned}
}