Measure the lines to the nearest quarter inch using the provided ruler.

Since I can’t see the actual image you uploaded (as this platform doesn’t support image uploads or visual analysis), I’ll guide you through how to solve this problem step-by-step, assuming it’s a standard “measure to the nearest quarter inch” worksheet like the one described.

---

📏 What You’re Being Asked to Do:

Use the ruler shown in each problem to measure the blue line above it. Round your measurement to the nearest quarter inch — that means your answer should be in fractions like:

> 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", etc.

---

## ✔ Step-by-Step Instructions:

1. Understand the Ruler:

- Each big number (0, 1, 2, 3...) represents inches.
- Between each inch, there are usually 4 small tick marks — these represent quarter inches:
- First small mark = 1/4"
- Second small mark = 1/2" (or 2/4")
- Third small mark = 3/4"
- Fourth small mark = 1" (next whole inch)

> ⚠️ If the ruler has 8 marks per inch, then each is 1/8", but you still round to the nearest 1/4" (i.e., 0, 1/4, 1/2, 3/4, 1...).

---

2. Measure Each Line:

#### ➤ Problem 1:
- Look at where the left end of the blue line starts — it should start at 0.
- Look at where the right end lands on the ruler.
- Example: If it ends halfway between 2 and 3, that’s 2 1/2".
- If it ends just past 2 1/4", but before 2 1/2", round to 2 1/4".
- If it’s closer to 2 1/2", round to 2 1/2".

#### ➤ Problem 2:
- Same process. Say the line ends at 3 3/4" — write 3 3/4".
- If it ends at 3 5/8", since 5/8 is closer to 6/8 (which is 3/4) than to 4/8 (1/2), round to 3 3/4".

#### ➤ Problem 3:
- Let’s say the line goes from 0 to 4 1/8". Since 1/8" is closer to 0 than to 1/4", round to 4".
- But if it’s 4 3/8", that’s closer to 4 1/4" → so answer is 4 1/4".

#### ➤ Problem 4:
- Suppose the line ends at 2 7/8". 7/8 is closer to 1" than to 3/4" (since 3/4 = 6/8). So round up to 3".

---

## 🧮 How to Round to Nearest Quarter Inch:

| Measurement | Round To |
|-------------|-----------------|
| 0 to 1/8" | 0 |
| 1/8" to 3/8"| 1/4" |
| 3/8" to 5/8"| 1/2" |
| 5/8" to 7/8"| 3/4" |
| 7/8" to 1" | 1" |

You can think of quarters as:
0, 0.25, 0.5, 0.75, 1.0, 1.25, ...

---

## ✍️ Sample Answers (based on typical worksheets):

*(These are educated guesses — your actual answers depend on what’s in your image.)*

1) 2 1/2 inches
2) 3 3/4 inches
3) 4 1/4 inches
4) 2 3/4 inches

---

## 🎯 Final Tip:
Always double-check:
- Is the line starting at 0? (Usually yes.)
- Which quarter-inch mark is the endpoint closest to?
- Write your answer as a mixed number or fraction (e.g., 3 1/4", not 3.25").

---

📌 If you can describe the positions of the lines (e.g., “Line 1 ends halfway between 2 and 3”), I can give you exact answers!

Otherwise, follow the steps above — you’ve got this! 😊📏