Skeleton Labeling Using Google Slides - Drag and Drop - Free Printable

To solve this problem, we need to match each bone name from the list on the left with its correct location on the human skeleton diagram. We’ll go step by step, starting from the top of the body and working downward, matching bones based on their known anatomical positions.

---

Step 1: Head and Skull Area

- cranium → This is the skull cap that protects the brain. It’s the large rounded part at the very top of the head.
- mandible → This is the lower jawbone — the only movable bone in the skull. It forms the chin and holds the lower teeth.
- maxilla → This is the upper jawbone. It holds the upper teeth and forms part of the nose and eye sockets. (Note: In many diagrams, maxilla may not be labeled separately if it's fused or implied, but here we have it as an option.)

Looking at the diagram:
- Topmost label pointing to the skull → cranium
- Label pointing to the lower jaw → mandible
- Label pointing to the upper jaw area (just below the eye socket) → maxilla

*(Wait — let’s check the diagram labels again carefully. The diagram has lines pointing to specific bones. Let’s map them one by one.)*

Actually, since we don’t have visual access, we must rely on standard anatomy and typical labeling order in such diagrams. Usually, these diagrams label bones in a logical sequence from head to toe.

Let’s assume the labels on the right side of the diagram are arranged vertically from top to bottom, corresponding to the skeleton’s structure.

Typical labeling order for such a diagram:

1. Cranium (skull)
2. Mandible (jaw)
3. Clavicle (collarbone)
4. Sternum (breastbone)
5. Ribs (but ribs aren't in our list — so skip)
6. Vertebrae (spine)
7. Scapula (shoulder blade) — often behind clavicle
8. Humerus (upper arm)
9. Radius & Ulna (forearm)
10. Carpals (wrist)
11. Phalanges (fingers)
12. Pelvis (hip bones)
13. Femur (thigh)
14. Patella (kneecap)
15. Tibia & Fibula (lower leg)
16. Tarsals (ankle/foot bones)
17. Sacrum (base of spine, between pelvis bones)

Also note: “vertebrae” refers to the entire spinal column, but sometimes labeled near the neck or back.

Now, let’s assign each term from the left list to its correct position based on standard anatomy:

Left List:
- tarsals → ankle/foot
- vertebrae → spine
- maxilla → upper jaw
- sacrum → triangular bone at base of spine, between hip bones
- patella → kneecap
- mandible → lower jaw
- scapula → shoulder blade
- radius → forearm (thumb side)
- phalanges → fingers/toes
- fibula → thinner lower leg bone (outside)
- pelvis → hip bones
- carpals → wrist
- clavicle → collarbone
- cranium → skull
- femur → thigh bone
- sternum → breastbone
- humerus → upper arm
- ulna → forearm (pinky side)
- tibia → shin bone (front of lower leg)

Now, imagine the diagram has 19 blank lines pointing to different bones. We need to fill each line with the correct term.

Since we can’t see the exact pointer locations, we must use logic: most educational diagrams label major bones in order from head to toe, front view.

Standard labeling sequence for anterior (front) view skeleton:

Top to bottom:

1. Cranium
2. Mandible
3. Clavicle
4. Sternum
5. Ribs (not in list)
6. Vertebrae (sometimes shown through rib cage or along spine)
7. Scapula (partially visible behind clavicle)
8. Humerus
9. Radius
10. Ulna
11. Carpals
12. Phalanges (hand)
13. Pelvis
14. Femur
15. Patella
16. Tibia
17. Fibula
18. Tarsals
19. Sacrum (may be labeled posteriorly, but sometimes included in pelvic region)

Wait — sacrum is usually seen from the back, but in some diagrams, it’s indicated between the iliac bones of the pelvis.

Also, note: “phalanges” could refer to hands or feet — but typically in such diagrams, hand phalanges are labeled first, foot ones later. But since “tarsals” are also there, likely “phalanges” here means finger bones.

But let’s count the terms: There are 19 terms on the left.

List again:

1. tarsals
2. vertebrae
3. maxilla
4. sacrum
5. patella
6. mandible
7. scapula
8. radius
9. phalanges
10. fibula
11. pelvis
12. carpals
13. clavicle
14. cranium
15. femur
16. sternum
17. humerus
18. ulna
19. tibia

That’s 19 items.

In a standard full-body anterior skeleton diagram with 19 labels, they would point to:

Head:
- cranium
- mandible
- maxilla (if detailed)

Neck/Shoulders:
- clavicle
- scapula (though mostly posterior, sometimes edge is visible)
- vertebrae (cervical spine might be labeled)

Torso:
- sternum
- vertebrae (thoracic/lumbar)
- pelvis
- sacrum (between pelvic bones)

Arms:
- humerus
- radius
- ulna
- carpals
- phalanges (hand)

Legs:
- femur
- patella
- tibia
- fibula
- tarsals
- phalanges? Wait — we already used phalanges for hand. But feet also have phalanges. However, the list only has one “phalanges”. So probably it refers to hand, and feet are covered by tarsals + maybe unlabeled toes.

But wait — the list includes “tarsals” which are ankle/foot bones, and “phalanges” — likely meaning finger bones, since toe bones are less commonly labeled separately in basic diagrams.

However, to resolve this, let’s think about common textbook diagrams.

A typical labeled skeleton diagram (anterior view) will have:

From top:

1. Cranium
2. Mandible
3. Maxilla (sometimes omitted, but if present, just below orbit)
4. Clavicle
5. Sternum
6. Scapula (lateral edge)
7. Humerus
8. Radius
9. Ulna
10. Carpals
11. Phalanges (hand)
12. Vertebrae (along spine, visible between ribs or at neck)
13. Pelvis
14. Sacrum (center of pelvis, posterior but sometimes indicated)
15. Femur
16. Patella
17. Tibia
18. Fibula
19. Tarsals

Yes — that fits 19.

So now, assigning:

Assuming the diagram’s labels are ordered roughly top to bottom, left to right, but since it’s a single column of blanks on the left, and pointers going to various parts, we need to match each pointer to the correct bone.

But without seeing the image, we must rely on standard matching.

Perhaps the best approach is to provide the correct pairing based on universal anatomy.

Let me create a mapping:

Pointer locations (inferred):

- Pointing to top of head → cranium
- Pointing to lower jaw → mandible
- Pointing to upper jaw → maxilla
- Pointing to collarbone → clavicle
- Pointing to breastbone → sternum
- Pointing to shoulder blade → scapula
- Pointing to spine → vertebrae
- Pointing to upper arm → humerus
- Pointing to thumb-side forearm → radius
- Pointing to pinky-side forearm → ulna
- Pointing to wrist → carpals
- Pointing to fingers → phalanges
- Pointing to hip bones → pelvis
- Pointing to base of spine between hips → sacrum
- Pointing to thigh → femur
- Pointing to kneecap → patella
- Pointing to shin → tibia
- Pointing to outer lower leg → fibula
- Pointing to ankle/foot → tarsals

This covers all 19.

Now, to write the final answer, we need to know which blank corresponds to which. Since the user didn’t specify the order of the blanks, but in such tasks, usually the blanks are listed in the same order as the pointers appear on the diagram — typically from top to bottom.

Looking at the original image description (even though I can’t see it), the user said "the diagram" with lines pointing to bones, and a list on the left.

In many such worksheets, the blanks are filled by writing the correct term next to each pointer, and the answer key lists them in the order of the pointers from top to bottom.

So, assuming the pointers are ordered from top of head down to feet:

Order of pointers (top to bottom):

1. Cranium (head)
2. Maxilla (upper face)
3. Mandible (jaw)
4. Clavicle (shoulder)
5. Scapula (shoulder blade — slightly lower or lateral)
6. Sternum (chest)
7. Vertebrae (spine — mid-back)
8. Humerus (upper arm)
9. Radius (forearm)
10. Ulna (forearm)
11. Carpals (wrist)
12. Phalanges (fingers)
13. Pelvis (hips)
14. Sacrum (base of spine, within pelvis)
15. Femur (thigh)
16. Patella (knee)
17. Tibia (shin)
18. Fibula (outer lower leg)
19. Tarsals (ankle/foot)

But wait — scapula is posterior, so in an anterior view, it might not be clearly labeled, or it might be labeled where the shoulder is.

Similarly, vertebrae might be labeled at the neck or back.

To avoid confusion, let’s use a reliable source-based assignment.

I recall that in standard NCERT or similar curricula, the labeling is:

For example:

- A: Cranium
- B: Mandible
- C: Clavicle
- D: Sternum
- E: Humerus
- F: Radius
- G: Ulna
- H: Carpals
- I: Phalanges
- J: Pelvis
- K: Femur
- L: Patella
- M: Tibia
- N: Fibula
- O: Tarsals
- P: Vertebrae
- Q: Scapula
- R: Sacrum
- S: Maxilla

But that’s arbitrary.

Perhaps the safest way is to list the correct matches without assuming order, but the task requires filling the blanks, which implies an order.

Given the constraints, and since this is a common homework problem, I will provide the answer in the order that the bones are typically labeled in such diagrams from top to bottom, front view.

Final decision: Based on standard anatomy and typical worksheet design, here is the correct matching for the 19 labels, assuming the pointers are ordered from top to bottom on the diagram:

1. cranium
2. maxilla
3. mandible
4. clavicle
5. scapula
6. sternum
7. vertebrae
8. humerus
9. radius
10. ulna
11. carpals
12. phalanges
13. pelvis
14. sacrum
15. femur
16. patella
17. tibia
18. fibula
19. tarsals

This uses all 19 terms and matches anatomical positions.

Let me double-check:

- Head: cranium, maxilla, mandible → 3
- Shoulder/chest: clavicle, scapula, sternum → 3 (total 6)
- Spine: vertebrae → 1 (7)
- Arm: humerus, radius, ulna, carpals, phalanges → 5 (12)
- Hip/pelvis: pelvis, sacrum → 2 (14)
- Leg: femur, patella, tibia, fibula, tarsals → 5 (19)

Perfect.

Note: Some might argue scapula is not visible anteriorly, but in many simplified diagrams, it's still labeled at the shoulder region.

Also, sacrum is often labeled in the pelvic area even in anterior views.

So, this should be correct.

Final Answer:
cranium
maxilla
mandible
clavicle
scapula
sternum
vertebrae
humerus
radius
ulna
carpals
phalanges
pelvis
sacrum
femur
patella
tibia
fibula
tarsals