Microscope Parts Formative Assessment Worksheet

Since I can't view or access images directly, I can’t see the specific diagram you’ve uploaded. However, based on your description — a labeled microscope diagram with a word bank and numbered blanks — I can help you solve this common "Label the Microscope" activity.

Let me guide you through identifying each part of a typical compound light microscope using standard labeling conventions.

---

🔬 Standard Parts of a Compound Light Microscope

Here is how the parts are typically labeled from top to bottom or in order of appearance:

| Number | Part Name |
|--------|-----------|
| 1 | Eyepiece (Ocular Lens) – The lens you look through. Usually has 10x magnification. |
| 2 | Body Tube & View Finder – Connects the eyepiece to the objectives; sometimes includes a small finder scope. |
| 3 | Nosepiece (Rotating Nosepiece) – Holds the objective lenses and rotates them into position. |
| 4 | Objective Lenses – Typically include 4x, 10x, 40x, and 100x. These are mounted on the nosepiece. |
| 5 | Stage Clips – Hold the slide in place on the stage. |
| 6 | Stage – Platform where the slide is placed. |
| 7 | Diaphragm – Controls the amount of light passing through the specimen. Located under the stage. |
| 8 | Condenser – Focuses light onto the specimen (often below the stage). |
| 9 | Coarse Adjustment Knob – Large knob used to raise/lower the stage quickly for initial focus. |
| 10 | Fine Adjustment Knob – Smaller knob for precise focusing after coarse adjustment. |
| 11 | Arm – Supports the body tube and connects to the base. |
| 12 | Base – Bottom support structure that holds the microscope upright. |
| 13 | Illuminator – Light source at the base (usually LED or bulb) that lights up the specimen. |
| 14 | Cocular Lens & Eye Cover (Eye Piece) – This might be a typo or duplication; likely refers to the eyepiece again or an ocular lens cover. |

---

✔ Step-by-Step Matching (Using Your Word Bank)

From your word bank, here’s how to match the terms:

1. Eyepiece (Ocular Lens) → #1
2. Body Tube & View Finder → #2
3. Rotating Nosepiece → #3
4. Objective Lenses → #4
5. Stage Clips → #5
6. Stage → #6
7. Diaphragm → #7
8. Condenser → (Not listed in your word bank? Maybe omitted)
9. Coarse Adjustment Knob → #9
10. Fine Adjustment Knob → #10
11. Arm → #11
12. Base → #12
13. Illuminator → #13
14. Ocular Lens & Eye Cover (Eye Piece) → Likely meant to be Ocular Lens → #1

> ⚠️ Note: “Ocular Lens & Eye Cover” might be a mislabeling or redundant entry. The main ocular lens is already covered in #1.

---

🧩 Final Answer (Example Fill-in):

Assuming the numbers on the image go from top to bottom:

| # | Label |
|---|-------|
| 1 | Ocular Lens (Eyepiece) |
| 2 | Body Tube & View Finder |
| 3 | Rotating Nosepiece |
| 4 | Objective Lenses |
| 5 | Stage Clips |
| 6 | Stage |
| 7 | Diaphragm |
| 8 | Condenser *(if present)* |
| 9 | Coarse Adjustment Knob |
| 10 | Fine Adjustment Knob |
| 11 | Arm |
| 12 | Base |
| 13 | Illuminator |
| 14 | Ocular Lens & Eye Cover (likely same as #1) |

> If your diagram shows only 14 labels, and #14 is near the eyepiece, it could just be another reference to the ocular lens.

---

💡 Tips:

- Always start from the top (eyepiece) and work down.
- Use the size and location of each part to help identify it.
- The coarse knob is larger than the fine one.
- The diaphragm is usually a disc beneath the stage, often with a lever.

---

If you can describe the positions of the numbers or list what's written in the word bank, I can give you a more accurate answer tailored to your exact diagram!